Mechanism differences (Verticle)

We have to be careful about 3 main parameters at
laundry machines. These 3 parameters are;
1-rotation speed of the machine
2-falling height (depends on loading capacity, water
amount, wing structure and rotation speed)
3-Machine surface area and structure (depends on the
type of machine (vertical or horizontal) and amounts and
size of the holes at the surface of machine)
For the best results during the rotation of the machine
from left to right, wings of the machine has to throw the
garments from hour 11 point to hour 5 point. This
adjustment can be done by arranging the loading amountwater
level-and rotation speed. This equilibrium is the
best level for optimum effect and safe wash. If the falling
point passes over 12 then abrasion will be lost, if the
falling point occurs before or around 9 again abrasion will
be lost and in both cases related to the structure of the
fabric risk of crease increases too much.